Mixers and Blenders
MixMor is a leading designer and manufacturer of industrial mixers and blenders, all of which are specifically designed and engineered to do more work, more efficiently, for a longer period of time without failure.
High quality, best value for your equipment dollar, and a comprehensive line of mixers for every job. That’s what you can expect from MixMor.
Portable Mixers and blenders
- ¼ to 5 HP electric, air and hydraulic motors
- Direct drive 1150 and 1750 rpm
- Gear drive 230, 290, 350 and 420 rpm
- Constant and variable speed
- Clamp and cup mounted
- USDA Accepted designs
Download the Portable Mixers Catalog →
Download the Mixers Inquiry Data Sheet →
Side-entry mixers and blenders
Side entering mixers are well suited for blending, storage and off-bottom solid suspension applications. They are commonly used in industries such as asphalt, petroleum, crude oil, gasoline, chemical, edible oil and paper mills. Because of their low initial cost and easy installation, side entering mixers are often preferred for larger tanks where mixing is easily accomplished or for large storage tank applications.
- Chemical and Petrochemical plant designs
- 1 to 75 HP electric and hydraulic motors
- Belt and gear drives 280, 350 and 420 rpm
- Constant and variable speed
- Stuffing box and mechanical shaft seals
- Fixed and swivel, flange and cover plate mounted
Download the Side-Entry Mixers Catalog →
Download the Mixers Inquiry Data Sheet →
Top-entry mixers and blenders
- 1/4 to 5 HP electric, air and hydraulic motors
- Direct drive 1150 and 1750 rpm
- Gear drive 230, 290, 350 and 420 rpm
- Constant and variable speed
- Baseplate and flange mounted
- Low and high pressure stuffing boxes
- Mechanical seal designs
Download the Top-Entry Mixers Catalog →
Download the Mixers Inquiry Data Sheet →
Turbine Mixers
Turbine mixers are used for a wide range of applications including simple blending and viscous blending. They are well suited for applications controlled by tank circulation such as solids suspension and heat transfer. Application examples include gas absorption, dissolution, crystallization and various reactions.
- 1/4 to 150 HP electric and hydraulic motors
- Constant and variable speed 1 to 350 rpm
- Worm gear, helical/work, all helical, helical/spiral bevel
- Baseplate and flange mounted
- High and low pressure stuffing boxes
- Single and double mechanical seals
Download the Turbine Drive Series G brochure →
Download the Turbine Drive Series J-K brochure →
Download the Turbine Drive Series N →
Download the Mixers Inquiry Data Sheet →
Laboratory Mixer
- Variable speed
- Constant speed
- Speed ranges 2 to 6000 rpm
- Air and electric
- Clamp and stand mounted